Pharma Chemicals
We feel proud to introduce ourselves as the leading trader, importer, exporter and distributor of highly effective Pharma Chemicals that comprises of cyclohexyl amine, bisphenol A, ethyl acetate, Di methyl formamide, butyl acetate, butyl cellosolve and many more items. Our offered range is processed at our vendor's end under the direction of our experienced professional in compliance with the set industrial standards. The offered chemicals are highly used in various chemical and pharmaceutical industries for their applications. Owing to their precise pH value, accurate composition and purity, our offered chemicals are more popular in both national and international markets.
Toluene
| Usage | Industrial |
| Physical State | Liquid |
| Grade Standard | Technical Grade |
| Density | 867 kg/m3 |
| Boiling point | 110.6 deg C |
| Formula | C7H8 |
Toluene formerly known as toluol, is a clear, water-insoluble liquid with the typical smell of paint thinners. It is a mono-substituted benzene derivative, i.e., one in which a single hydrogen atom from a group of six atoms from the benzene molecule has been replaced by a univalent group, in this case CH3. As such, its IUPAC systematic name is methylbenzene.
It is an aromatic hydrocarbon that is widely used as an industrial feedstock and as a solvent. Like other solvents, toluene is sometimes also used as an inhalant drug for its intoxicating properties; however, inhaling toluene has potential to cause severe neurological harm.Toluene is an important organic solvent, but is also capable of dissolving a number of notable inorganic chemicals such as sulfur, iodine, bromine, phosphorus, and other non-polar covalent substances.
"This particular price varies on daily basis.please call and check for the latest price."
Specifications:
Index | Standard |
Molecular formula | C7H8 or C6H5CH3 |
Molar mass | 92.14 g/mol |
Appearance | colorless liquid |
Density | 0.8669 g/mL (20 °C) |
Melting point | 93 °C |
Boiling point | 110.6 °C |
Solubility in water | 0.47 g/l (20-25°C) |
Refractive index (nD) | 1.497 (20 °C) |
Viscosity | 0.590 cP (20 °C) |
Applications:
Toluene is a common solvent, able to dissolve paints, paint thinners, silicone sealants, many chemical reactants, rubber, printing ink, adhesives (glues), lacquers, leather tanners, and disinfectants. It can also be used as a fullerene indicator, and is a raw material for toluene diisocyanate (used in the manufacture of polyurethane foam) and TNT.
In addition, it is used as a solvent to create a solution of carbon nanotubes. It is also used as a cement for fine polystyrene kits (by dissolving and then fusing surfaces) as it can be applied very precisely by brush and contains none of the bulk of an adhesive.
Industrial uses of toluene include dealkylation to benzene, and the disproportionation to a mixture of benzene and xylene in the BTX process. When oxidized it yields benzaldehyde and benzoic acid, two important intermediates in chemistry.
It is also used as a carbon source for making Multi-Wall Carbon Nanotubes. Toluene can be used to break open red blood cells in order to extract hemoglobin in biochemistry experiments.
Packings:
- 172 kg Drum OR 200 Litre Drum
Guetol
| Form | Liquid |
| Brand | Imported |
| Usage/Application | INDUSTRIAL |
| Grade Standard | Industrial Grade |
| Cas-No | 94-71-3 |
| Physical State | Liquid |
CAS number: 94-71-3
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
- Port of Dispatch: Bhiwandi
- Delivery Time: Ready
Methylene Dichloride (MDC)
| Packaging Type | Drum |
| Packaging Size | 250 Kgs |
| Usage | Cleaning |
| Grade Standard | Pharmaceutical |
| Purity (%) | 99.5 |
| Density (g/Cm Cube) | 1.3266 |
| Melting Point (deg. Celsius) | (96.7) |
| CAS Number | 75-09-2 |
| Physical State | Liquid |
We at Antares Chem Pvt. Ltd. are offering quality range of Methylene Di Chloride – MDC. The volatility and ability of the chemical to dissolve a wide range of organic compounds makes it a useful solvent for many chemical processes. Our range is formulated using high quality raw chemicals at our well established manufacturing unit as per the latest technology.
Applications:
- Adhesives for Polymethyl Methacrylate
- Aerosol Propellant, Refrigerant
- Chemical Reaction Media
- Low-temperature heat-transfer medium
- Formulation of Polycarbonates, Phenolics, Rayon yarn
- Used as solvent for Cellulose Acetates, Photo-resist, Tablet film coatings
- Paint and Grease Removing Agent
- Fire-Fighting Agent
- Extract-ant for Edible fats, Cocoa, Butter and Essences.
"This particular price varies on daily basis.please call and check for the latest price."
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
- Port of Dispatch: Bhiwandi
- Delivery Time: Ready
*Your information is safe with us.
Dimethyl Formamide DMF
| Packaging Details | Carboy / Drum |
| Usage | Commercial, Industrial |
| Physical State | Liquid |
| Grade Standard | Technical Grade |
| Usage/Application | Industrial |
| Formula | C3H7NO |
Features & Uses:
Highly effective
Quick and fast results
Purity
- It is used as a reagent in the Bouveault aldehyde synthesis and in the Vilsmeier-Haack reaction, another useful method of forming aldehydes.
- It is also a common catalyst used in the synthesis of acyl halides, in particular the synthesis of acyl chlorides from carboxylic acids using oxalyl or thionyl chloride. The catalytic mechanism entails reversible formation of an imidoyl chloride.
"This particular price varies on daily basis. Please call and check for the latest price"
MDC Methylene Di Chloride
| Packaging Size | 250/260 |
| Packaging Type | Drum |
| Density | 1.33 g/cm3 |
| Boiling point | 39.6 deg C |
| Molar mass | 84.93 g/mol |
| Formula | CH2Cl2 |
"This particular price varies on daily basis.please call and check for the latest price."
- Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
O-Phenylenediamine
| Minimum Order Quantity | 25 Kg |
| Molecular Formula | C6H8N2 |
| Packaging Size | 25 |
| Packaging Type | Bag |
| Grade Standard | Technical Grade |
| Physical State | Crystals |
| Usage | Industrial |
| Boiling Point (Degree Celsius) | 252 |
| Melting Range | 102 to 104 |
| Bulk Density | 1.031 |
| Cas-No | 95-54-5 |
| Density | 1.031 |
| Form of Chemicals | Granules |
o-Phenylenediamine condenses with ketones and aldehydes to give rise to a variety of useful products. Reactions with carboxylic acids and their derivatives afford benzimidazoles. The herbicide is prepared in this manner. Also, quinoxalinedione may be prepared by condensation of o-phenylenediamine with dimethyl oxalate. Condensation with xanthate esters affords mercaptoimidazoles, which are used as antioxidants in rubber products. Treatment with nitrous acid gives benzotriazole, a corrosion inhibitor. Condensation of substituted o-phenylenediamine with various diketones is used in the preparation of a variety of pharmaceuticals.In coordination chemistry, phenylenediamine is an important ligand precursor. Schiff base derivatives, such as those derived from salicylaldehyde, are excellent chelating ligands. Oxidation of its metal-phenylenediamine complexes affords the diimine derivatives, which are intensely colored and often exist in multiple stable oxidation states.
"This particular price varies on daily basis. Please call and check for the latest price"
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
- Port of Dispatch: Bhiwandi
*Your information is safe with us.
Butylated Hydroxy Toluene
| Packaging Details | 25 kg Bag |
| Physical State | Powder |
| Pack Type | Bag |
| Form | Powder |
| Process | Hydrogenation Catalyst |
| Color | White |
BHT is also used as an antioxidant additive in such diverse products as cosmetics, pharmaceuticals, rubber, electrical transformer oil In the petroleum industry, where BHT is known as the fuel additive AO-29, it also finds uses in hydraulic fluids, turbine and gear oils, and jet fuels, among other applications. BHT is also used to prevent peroxide formation in diethyl ether and other laboratory chemicals.
Some additive products contain BHT as their primary ingredient, while others contain the chemical merely as a component of their formulation, sometimes alongside butylated hydroxyanisole (BHA)."This particular price varies on daily basis.please call and check for the latest price."
1 Bromo 3 Chloropropane
| Usage | Industrial |
| Physical State | Liquid |
| Grade Standard | Technical Grade |
| Packaging Type | HDPE Drum |
| Packaging Size | 250-500 kg |
| Usage/Application | Industrial |
Features:
- Longer shelf life
- Effective
- Water soluble
Technical Data:
- Available: Boiling Point of 143.3°C @ 760 MM HG
- Melting Point of -58.90°C
- Density/Specific Gravity of 1.5969 @ 20°C/4°C
- Formula: C3H6BrCl
- Molecular Weight: 157.43674
Applications:
- Used as solvent
- Also used as intermediate to manufacture
- Surfactant
- Pharmaceuticals
- Other organic compounds
"This particular price varies on daily basis.please call and check for the latest price."
- Item Code: 1BCP
Methylene Di Chloride - MDC
| Brand | IMPORTED |
| Packaging Size | 250/260 Kgs |
| Packaging Type | Drum |
| Density | 1.33 g/cm3 |
| Boiling point | 39.6 deg C |
| Molar mass | 84.93 g/mol |
We at Antares Chem Pvt. Ltd. are offering quality range of Methylene Di Chloride – MDC. The volatility and ability of the chemical to dissolve a wide range of organic compounds makes it a useful solvent for many chemical processes. Our range is formulated using high quality raw chemicals at our well established manufacturing unit as per the latest technology.
Applications:
- Adhesives for Polymethyl Methacrylate
- Aerosol Propellant, Refrigerant
- Chemical Reaction Media
- Low-temperature heat-transfer medium
- Formulation of Polycarbonates, Phenolics, Rayon yarn
- Used as solvent for Cellulose Acetates, Photo-resist, Tablet film coatings
- Paint and Grease Removing Agent
- Fire-Fighting Agent
- Extract-ant for Edible fats, Cocoa, Butter and Essences.
"This particular price varies on daily basis.please call and check for the latest price."
*Your information is safe with us.
Methyl Acrylate
| Usage/Application | Industrial |
| Physical State | Liquid |
| Chemical formula | C4H6O2 |
| Odor | Acrid |
| Solubility in water | 5 g/100 mL |
| Appearance | Colorless liquid |
Features:
- Optimum pure in nature
- Safe usage
- Highly effective
"This particular price varies on daily basis.please call and check for the latest price."
- Item Code: MAcrylate
- Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
Acetic Acid
| Usage/Application | Industrial |
| Form | Liquid |
| Grade Standard | Food, Tech, Industrial |
| Application | Pharmaceutical Intermediates |
| Concentration | 3% to 5% |
| Formula | CH3COOH |
Acetic acid, systematically named ethanoic acid is an organic compound with the chemical formula CH3COOH (also written as CH3CO2H or C2H4O2). It is a colourless liquid that when undiluted is also called glacial acetic acid. Vinegar is roughly 3-9% acetic acid by volume, making acetic acid the main component of vinegar apart from water. Acetic acid has a distinctive sour taste and pungent smell. Besides its production as household vinegar, it is mainly produced as a precursor to polyvinylacetate and cellulose acetate. Although it is classified as a weak acid, concentrated acetic acid is corrosive and can attack the skin.
Product Details & Specification:
- CAS-No. 111-46-6
- Disposal: 1
- Merck Index 11, 3109
- HS No.: 2909 41 00 0
- M=106.12 g/mol
- 1l=1.12kg
- Melting point -6oC
- Boil. point 244oC
- Vapour press./20oC 0.03 hPa
- Miscible with water in all proport.
- Ignition temperature 225oC
- Harmful
"This particular price varies on daily basis.please call and check for the latest price."
Dichloromethane
| Packaging Details | 200 L Drum |
| Usage | Industrial |
| Physical State | Liquid |
| Grade Standard | Technical Grade |
| Packaging Type | SS Drum |
| Usage/Application | Industrial |
"This particular price varies on daily basis.please call and check for the latest price."
*Your information is safe with us.
Dimethyl Carbonate
| Brand | Imported |
| Usage | Industrial |
| Grade Standard | Technical Grade |
| Physical State | Liquid |
| Molar mass | 90.08 g/mol |
| Formula | C3H6O3 |
"This particular price varies on daily basis.please call and check for the latest price."
Physical and Chemical Properties:
| Physical state and appearance | Clear liquid |
| Odor | Pleasant |
| Molecular Weight | 90.08 g/mole |
| Color | Colorless. Clear |
| Boiling Point | 90°C (194°F) - 91 C |
| Critical Temperature | 274.85°C (526.7°F) |
| Flash point | 18°C (64.4°F). OPEN CUP: 21.667°C (71°F). |
| Melting Point | 2°C (35.6°F) - 4 C. |
| Specific Gravity | 1.069 @ 20 C.(Water = 1) 1.0636 @ 25 C |
| Vapor Pressure | 5.6 kPa (@ 20°C) |
| Vapor Density | 3.1 (Air = 1) |
| Solubility | Insoluble in cold water, hot water |
| Purity | 99.0% min |
| Water | 0.1% max |
| Free Acid | 0.2% max |
Cyclohexylamine
| Brand | Imported |
| Physical Form | Drum |
| Physical State | Liquid |
| Packaging Size | 175 kg |
| Usage | Industrial |
| Grade Standard | Technical Grade |
Cyclohexylamine is an organic compound, belonging to the aliphatic amine class. It is a colorless liquid, although like many amines, samples are often colored due to contaminants. It has a fishy odor and is miscible with water. Like other amines, it is a weak base, compared to strong bases such as NaOH, but it is a stronger base than itsaromatic analog, aniline.
It is a useful intermediate in the production of many other organic compounds. It is a metabolite of cyclamate.
"This particular price varies on daily basis.please call and check for the latest price."
Para Toluene Sulfonic Acid
| Usage/Application | Industrial |
| Brand | Imported |
| Physical State | Powder |
| Usage | Industrial |
| Packaging Type | Bag |
| Grade Standard | Technical Grade |
| p-toluenesulfonic acid |
Chemical formula:
Appearance: off-white/ white powder.
Free sulphate: max 1%.
Assay: 99. 0% ± 1%
Moisture: 10. 0% max
Solubility: soluble in water and alcohol.
Hygroscopicity: extremely hygroscopic
Uses:
Reaction catalyst.
Hydrotropic agent.
Sodium ptsa
Sodium p-toluene sulphonate 50% is also available
Pack size: 50kgs hdpe bag with pp liner.
Store in well closed container/bag in cool and dry place
"this particular price varies on daily basis.Please call and check for the latest price."
*Your information is safe with us.
PEG 400
| Purity % | >99% |
| Packaging Details | 200 kg Drum |
| Usage/Application | Osmotic laxatives, Surfactants, Inactive substance for drugs |
| Grade Standard | Industrial Grade |
| CAS No | 25322-68-3 |
| Synonyms | poly(oxyethylene), poly(ethylene oxide), PEG |
| Chemical Formula | C2nH4n+2On+1 |
| EC No. | 500-038-2 |
| Molecular Weight | 18.02 g/mol |
| Density | 1.12 g/cm.cu |
| Melting Point | 4 - 8 DegreeC |
| Boiling Point | >200 DegreeC |
| Viscosity | 90.0 cSt at 25 DegreeC |
| Packaging Details | Price |
| 1 kg Bag | Rs 85 |
| 200 kg Drum | Rs 16,800 |
(*GST & transportations charges to be applied)
"This particular price varies on daily basis. Please call and check for the latest price."
Get Best price of 99% pure 200 Kg Drum of Polyethylene Glycol CAS No. 25322-68-3, C2nH4n+2On+1. For Certificate of Analysis (COA) & MSDS, kindly contact us.
Specifications:
| Appearance | Clear liquid |
| Specific Gravity | 1.12 - 1.13 |
| Colour (APHA) | 10 max |
| Viscosity | 90 cP at 25 C |
| Moisture | 0.2% max |
| Packing | 50 & 230 Kg |
| Use | It is an attractive ingredient in cosmetics such as creams, jellies and lotions . PEG-400 is added to lotions intended to have a mild relaxing effect on skin . It is easily absorbed by the skin acting as solution promoter for the therapeutic agents which c |
| Storage | Keep container tightly closed. Keep container in a cool, well-ventilated area. |
| Others | Hydroxy; value-265 - 295 (mg KOH/g), Pour point-4ºC |
First Aid Measures:
If inhaled - then immediately take the patient to fresh air.
If case of skin contact - take off immediately all contaminated clothing. Rinse skin with water/ shower.
In case of eye contact - flush eyes with Plenty of water.
If swallowed - make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Fire Fighting Measures:
Suitable Extinguishing Media- Use water, alcohol-resistant foam, dry chemical or carbon dioxide
Special hazards arising from the substance or mixture -
- Vapours may spread along floors.
- Forms explosive mixtures with air on intense heating
Advice for firefighters- in the event of fire, wear self-contained breathing apparatus.
Storage and handling:
Precautions for safe handling
- observe label precautions.
- hygiene measures
- change contaminated clothing. Wash hands after working with substance
Precautions for safe storage:
- Storage conditions Tightly closed.
- Recommended storage temperature
- see product label.
Di Ethylene Glycol
| Purity % | 99% |
| Packaging Details | 200 litres Drum |
| Usage/Application | Preparation of antifreeze and dyes, Manufacture of resins and plasticizers, Dehydrating agent |
| Grade Standard | Industrial Grade |
| CAS No | 111-46-6 |
| Synonyms | DEG, Dihydroxy diethyl ether, Ethylene diglycol, Diglycol |
| Form of Chemicals | Liquid |
| Chemical Formula | C4H10O3 |
| EC No. | 203-872-2 |
| Color | Colorless |
| Odour | Odorless |
| Molecular Weight | 106.12 g/mol |
| Density | 1.12 g/cm.cu |
| Melting Point | (-) 10.45 Deg C |
| Boiling Point | 197 DegreeC |
Diethylene Glycol Price List
| Packaging Details | Price |
| 1 kg Bag | Rs 57 |
| 200L Drum | Rs 11,200 |
(*GST & transportations charges to be applied)
- Item Code: DEG
Methyl Isopropyl Ketone
| Purity % | > 99% |
| CAS No | 563-80-4 |
| Packaging Details | 200 litres Drum |
| Usage/Application | leather industry, printing ink, rubber chemicals, manufacturing of paints |
| Synonyms | isobutyl methyl ketone, isopropylacetone, MIPK |
| Grade Standard | Industrial Grade |
| Chemical Formula | C5H10O |
| EC No. | 209-264-3 |
| Physical State | Liquid |
| Molecular Weight | 86.13 g/mol |
| Melting Point | 134 DegreeF,-92.0 DegreeC |
| Boiling Point | 201 DegreeF at 760 mm Hg,94.3 DegreeC |
| Refractive index | 1.3880 at 20 DegreeC/D |
| Flash Point | below 70 DegreeF |
| Ignition Temperature | 1.8 DegreeF,475 DegreeC |
| ICSC Number | 922 |
| NSC Number | 9379 |
| RTECS Number | EL9100000 |
| UNII | V8DP6THY5O |
| Henrys Law Constant | 1.13X10-4 atm-cu m/mole |
| Ionization Potential | 9.32 eV |
| ChemSpider | 10777 |
| ECHA InfoCard | 100.008.423 |
| CompTox Dashboard (EPA) | DTXSID0022062 |
| Deprecated CAS | 52325-52-7 |
| DSSTox Substance ID | DTXSID0022062 |
| XLogP3 | 0.8 |
| Complexity | 55 |
| Compound Is Canonicalized | Yes |
| Heavy Atom Count | 5 |
| Packaging Details | Price |
| 1 Kg Drum | Rs 450 |
| 200 Litre Drum | Rs 90,000 |
3-Methyl-2-butanone
(methyl isopropyl ketone, MIPK) is a ketone and solvent of minor importance. It is comparable to MEK (Methyl ethyl ketone), but has a lower solvency and is more expensive. Get best price for Methyl Iso Propyl Ketone (MIPK), CAS No. 563-80-4, C5H10O of purity >99% in packaging size 200 litre drum. It is used in leather industry as well as rubber chemicals along with other uses.Certificate of analysis (Coa) and material safety data sheet(msds) is attached.
Spectral information:
UV Spectra-Maximum UV absorption near 280 nm with shoulder extending above 290 nm.IR Spectra-5287
Pharmacology and Biochemistry:
Absorption, Distribution and Excretion-When a dose of 1000 mg/kg methyl isopropyl ketone was administered to rats, 38-54% was eliminated unchanged in 25-35 hours, predominantly in the expired air.
Metabolism/Metabolites-Ketones are not readily metabolized in the body. With most of the lower ketones as much as 50% of the dose may be eliminated unchanged from the body, mainly in the exhaled air and to a small extent in the urine. The major metabolic pathway of ketones is reduction to the corresponding secondary alcohols, which are usually eliminated as glucuronic acids. In rats, 38-54% of a dose of 1000 mg/kg bw methyl isopropyl ketone was eliminated unchanged in about 25-35 hours, mainly in the expired air. Administration of this ketone to rabbits increased the glucuronic acid output. It has been suggested that MIPK is a normal constituent of human urine.
Safety and Hazards:
First aid measures-
- Eye: If this chemical contacts the eyes, immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical.
- Skin: If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.
- Breathing: If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform mouth-to-mouth resuscitation. Keep the affected person warm and at rest. Get medical attention as soon as possible.
- Swallow: If this chemical has been swallowed, get medical attention immediately
Excerpt from ERG Guide 127 [Flammable Liquids (Water-Miscible)]: CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. CAUTION: For fire involving UN1170, UN1987 or UN3475, alcohol-resistant foam should be used. SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. LARGE FIRE: Water spray, fog or alcohol-resistant foam. Do not use straight streams. Move containers from fire area if you can do it without risk. FIRE INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank.
- Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
*Your information is safe with us.
Trifluoroacetic Acid
| Brand | Imported |
| Form | Liquid |
| Physical State | Liquid |
| Usage | Commerical, Industrial |
| Grade Standard | Technical Grade, Bio-Tech Grade |
| Molar mass | 114.02 g/mol |
"This particular price varies on daily basis.please call and check for the latest price."
Ethyl Acetate
| Usage/Application | Industrial |
| Packaging Size | 205 kg |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
| Purity | 99% |
| Packaging Type | Drum |
By keeping track with the latest market developments, we are engaged in offering a high quality Ethyl Acetate. This chemical is sourced from our reliable vendors who process using the finest grade chemical compounds and advanced technology in accordance with the set industry standards. The offered range is also verified on various quality parameters to ensure their long shelf life. Additionally, our offered range is widely praised among our precious clients for their salient features.
Features:
Quick response
Precisely processed
Safe to use
"This particular price varies on daily basis. Please call and check for the latest price"
Butyl Cellosolve
| Packaging Details | 200 litres Drum |
| Packaging Type | Drum |
| Physical State | Liquid |
| Boiling Point | 171 deg C |
| Density | 900 kg/m3 |
| Melting Point | -77 deg C |
Features:
- Exact composition
- Precisely processed
- Highly effective
Advantages:
Excellent active solvency
Superior coupling and coalescing abilities
Moderate evaporation rate
High dilution ratio
Nearly equal balance of hydrophobic and hydrophilic characteristics
Used in:
Solvent-based coatings
Industrial and architectural water-based coatings
Household and industrial cleaners, rust removers, hard surface cleaners, and disinfectants
Solvent-based silk screen printing inks
Water-based printing inks
"This particular price varies on daily basis. Please call and check for the latest price"
- Item Code: ButylCellosolve
*Your information is safe with us.
Propionic Acid
| Usage/Application | Industrial |
| Packaging Details | 200 L Drum |
| Packaging Type | Drum |
| Physical State | Liquid |
| Usage | Industrial, Commerical, Laboratory |
| Grade Standard | Bio-Tech Grade, Technical Grade |
| Purity | 85% |
"This particular price varies on daily basis.please call and check for the latest price."
| Applications/Uses |
|
Dimethyl Formamide
| Brand | imported |
| Usage/Application | Industrial |
| Physical State | Liquid |
| Usage | Industrial |
| Grade Standard | Technical Grade |
| Formula | C3H7NO |
Features & Uses:
Highly effective
Quick and fast results
Purity
- It is used as a reagent in the Bouveault aldehyde synthesis and in the Vilsmeier-Haack reaction, another useful method of forming aldehydes.
- It is also a common catalyst used in the synthesis of acyl halides, in particular the synthesis of acyl chlorides from carboxylic acids using oxalyl or thionyl chloride. The catalytic mechanism entails reversible formation of an imidoyl chloride.
Acrylic Acid
| Usage/Application | Industrial |
| Packaging Details | Carboy / Drum |
| Form | Liquid |
| Physical State | Liquid |
| Usage | Industrial |
| Grade Standard | Technical Grade |
| Molar mass | 72.06 g/mol |
Acrylic acid and its esters readily combine with themselves (to form polyacrylic acid) or other monomers (e. g. acrylamides, acrylonitrile, vinyl, styrene, and butadiene) by reacting at their double bond, forming homopolymers or copolymers which are used in the manufacture of various plastics, coatings, adhesives, elastomers, as well as floor polishes, and paints.
"This particular price varies on daily basis.please call and check for the latest price."
*Your information is safe with us.
DMF Solvent
| Packaging Details | Carboy / Drum |
| Physical State | Liquid |
| Usage | Industrial |
| Grade Standard | Technical Grade |
| Usage/Application | Industrial |
| Formula | C3H7NO |
Features & Uses:
Highly effective
Quick and fast results
Purity
- It is used as a reagent in the Bouveault aldehyde synthesis and in the Vilsmeier-Haack reaction, another useful method of forming aldehydes.
- It is also a common catalyst used in the synthesis of acyl halides, in particular the synthesis of acyl chlorides from carboxylic acids using oxalyl or thionyl chloride. The catalytic mechanism entails reversible formation of an imidoyl chloride.
"This particular price varies on daily basis.please call and check for the latest price."
DMF
| Packaging Details | Carboy / Drum |
| Usage | Commerical, Industrial |
| Physical State | Liquid |
| Grade Standard | Technical Grade |
| Usage/Application | Industrial |
| Density | 944 kg/m3 |
Features & Uses:
Highly effective
Quick and fast results
Purity
- It is used as a reagent in the Bouveault aldehyde synthesis and in the Vilsmeier-Haack reaction, another useful method of forming aldehydes.
- It is also a common catalyst used in the synthesis of acyl halides, in particular the synthesis of acyl chlorides from carboxylic acids using oxalyl or thionyl chloride. The catalytic mechanism entails reversible formation of an imidoyl chloride.
"This particular price varies on daily basis.please call and check for the latest price."
DMF
| Packaging Details | Carboy / Drum |
| Physical State | Liquid |
| Usage | Industrial, Commercial, Domestic |
| Grade Standard | Technical Grade |
| Usage/Application | Industrial |
| Molar mass | 73.09 g/mol |
Features & Uses:
Highly effective
Quick and fast results
Purity
- It is used as a reagent in the Bouveault aldehyde synthesis and in the Vilsmeier-Haack reaction, another useful method of forming aldehydes.
- It is also a common catalyst used in the synthesis of acyl halides, in particular the synthesis of acyl chlorides from carboxylic acids using oxalyl or thionyl chloride. The catalytic mechanism entails reversible formation of an imidoyl chloride.
*Your information is safe with us.
Bisphenol A
| Brand | Imported |
| Usage/Application | Industrial |
| Usage | Industrial |
| Grade Standard | Technical Grade |
| Molar mass | 228.29 g/mol |
| Formula | C15H16O2 |
"This particular price varies on daily basis.please call and check for the latest price."
Features:
- Quick response
- Precise composition
- Long shelf life
Specifications:
| Item | Specifications | Lot No 130824 Analysis Result | Lot No 130824 Analysis Result |
| Purity, WT% | 99.8 Min. | 99.9 | 99.9 |
| Freezing Point, Degree C | 156.6 Min | 156.7 | 156.7 |
| Solution Color, Apha(35.5G BPA in 50ml Methanol) | 10 max. | 7 | 6 |
| Free Phenol, Wt-pp | 50 Max | 7 | 7 |
| Ash, Wt-PPM | 5 max. | Nil | Nil |
| Iron, WT-PPM | 0.5 Max | 0.1 | 0.1 |
| Appearance | White Bead | White Bead | White Bead |
| Water. %wt-PPM | - | 392 | 350 |
Cyclohexane
| Packaging Type | Can |
| Physical State | Powder |
| Usage | Commerical, Industrial |
| Color | Colourless |
| Density | 779 kg/m3 |
| Molar mass | 84.16 g/mol |
Use : Cyclohexane is used in a number of industrial applications. The primary use of cyclohexane, accounting for approximately 58 percent of all use, is in the production of adipic acid, a nylon intermediate. Cyclohexane is also used in the production of caprolactam, another nylon intermediate. Small amounts are used as a solvent for lacquers and resins; as a paint and varnish remover; as an intermediate in the manufacture of benzene, cyclohexanone, and itrocyclohexane; as fuel for camp stoves; as an ingredient in fungicidal formulations; and in the industrial recrystallization of steroids
"This particular price varies on daily basis.please call and check for the latest price."
Methanesulfonyl Chloride
| Usage/Application | Industrial |
| Physical State | Liquid |
| Purity | 99.5 % |
| Density | 1.48 g/cm3 |
| Molar mass | 114.56 g/mol |
| Formula | CH3ClO2S |
We are recognized in the industry for offering a optimum quality Methane Sulfonyl Chloride. The offered range is processed using supreme class ingredients and the latest processing methodology under the guidance of trained chemical experts at vendors end. To ensure quality and purity, our offered range is rigorously tested on various quality parameters. Highly demanded across various labs and chemical industries, our offered range can be availed by our clients in attractive packaging options.
The main use of methanesulfonyl chloride is the formation of methanesulfonates from alcohols in the presence of a non-nucleophilic base. Methanesulfonates are used as intermediates in substitution reactions, elimination reactions, reductions, and rearrangement reactions. When treated with a Lewis acid, oxime methanesulfonates will undergo a facile Beckmann rearrangement.
Methanesulfonates have been occasionally used as a protecting group for alcohols. It is stable to acidic conditions and is cleaved back to the alcohol using sodium amalgam.
"This particular price varies on daily basis.please call and check for the latest price."
*Your information is safe with us.
Dimethylformamide
| Packaging Size | 25-50 kg |
| Purity | 99.5 % |
| Usage/Application | Industrial |
| Physical State | Liquid |
| PH Value | 5-7 |
| Usage | Industrial |
Features:
Highly effective
Quick and fast results
Purity
"This particular price varies on daily basis.please call and check for the latest price."
Methylal
| Brand | Imported |
| Packaging Size | 1 Litre |
| Usage/Application | Industrial |
| Packaging Type | Bottle |
| Physical Form | Liquid |
| Density | 860 kg/m3 |
- Item Code: ANpt
- Delivery Time: Ready
Polypropylene Glycol
| Purity % | >99% |
| Packaging Details | 200 litres Drum |
| Usage/Application | Humectant in medicines or food products, Solvent for food colors and flavors, Artificial smoke |
| Grade Standard | Industrial Grade |
| CAS No | 57-55-6 |
| Synonyms | Methyl ethyl glycol |
| Physical State | Liquid |
| Formula | (C3H6)n |
| Density | 946 kg/m3 |
| Melting point | 160 deg C |
| Packaging Details | Price |
| 1 litre bottle | Rs 195 |
| 200 litres drum | Rs 38500 |
(*GST & transportations charges to be applied)
Our organization is instrumental in offering a wide range of Polypropylene Glycol. The offered Polypropylene glycol is processed according to the market norms by utilizing best grade chemical compounds in accurate composition. Apart from this, we offer this Polypropylene glycol in number of packaging options with different stipulations at affordable rates. Get Best price of >99% pure 200 litre drum of Polypropylene Glycol. For Certificate of Analysis (COA) & MSDS, kindly contact us.
"This particular price varies on daily basis.please call and check for the latest price."
Features:
- Highly effective
- Non reactive
- Safe usage
Available with various molecular weights like:
PPG - 1000
PPG - 2000
PPG - 4000
Specifications:
|
Items |
Data |
|
Appearance |
Clear Liquid |
|
Color (APHA No.) |
75 max. |
|
Water content (wt%) |
0.05 max. |
|
Hydroxyl Number (mg KOH/g) |
54 - 58 |
|
Viscosity at 25 (cps) |
260 - 340 |
|
Acid number (mg KOH/g ) |
0.03 max. |
|
pH |
5.0 – 7.0 |
|
BHT(Butylated hydroxytoluene) content (ppm) |
none |
Uses:
- Used in food applications (E-number 1520)
- Used in pharmaceutical industry
- Used in cosmetics industry
- Used as aircraft de-icing fluid
- Used as solvent in industrial applications
First Aid
- First check the victim for contact lenses and remove if present.
- Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
- Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician.
- Immediately transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
- Skin: Immediately flood affected skin with water while removing and isolating all contaminated clothing.
- Gently wash all affected skin areas thoroughly with soap and water.
- If symptoms such as redness or irritation develop, immediately call a physician and be prepared to transport the victim to a hospital for treatment.
- Inhalation: Immediately leave the contaminated area; take deep breaths of fresh air.
- If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital.
- Item Code: PPG
*Your information is safe with us.
Dimethylformamide
| Physical State | Liquid |
| Usage | Commercial |
| Grade Standard | Technical Grade |
| Boiling point | 153 deg C |
| Formula | C3H7NO |
| Melting point | -61 deg C |
Keeping track of market development, we are involved in offering a supreme quality Dimethylformamide Chemical to our clients. The offered range is processed at our vendor's end using the utmost quality chemicals and the latest processing procedures as par the set industry standards. Our offered range is widely used in various laboratories and pharmaceutical industries. We offer this in various packaging options at feasible prices.
Features:
Highly effective
Quick and fast results
Purity
"This particular price varies on daily basis.please call and check for the latest price."
Butyl Acetate
| Usage | Pharmaceutical |
| Usage/Application | Industrial |
| Density (g/Cm Cube) | 0.8825 g/cm3 |
| Purity (%) | 99 |
| Color | Colourless |
| Is It Flammable | Flammable |
| Packaging Type | Drum |
Features:
- Precisely processed
- Uniform composition
- Long shelf life
"This particular price varies on daily basis.please call and check for the latest price."
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
Solvent Ether
| Packaging Size | 140/150 Kgs |
| Packaging Type | Drum |
| Usage/Application | Industrial |
| Formula | (C2H5)2O |
| Density | 713 kg/m3 |
| Molar Mass | 74.12 g/mol |
2H
5)
2O. It is a colorless, highly volatile flammable liquid. It is commonly used as a solvent in laboratories and as a starting fluid for some engines. It was formerly used as a general anesthetic, until non-flammable drugs were developed, such as halothane. It has been used as a recreational drug to cause intoxication.
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
*Your information is safe with us.
Sodium Hydroxide
| CAS No. | 1310-73-2 |
| Packing Size | 5-25 kg |
| Type | Balls |
| Grade Standard | Industrial Grade |
| Usage/Application | Industrial |
| Purity | 99% |
Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with formula NaOH. It is a white solid ionic compound consisting of sodium cationsNa+
and hydroxide anions OH−
.
Sodium hydroxide is a highly caustic base and alkali, that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns. It is highly soluble in water and readily absorbs moisture and carbon dioxide from the air. It forms a series of hydrates NaOH·nH
2O. The monohydrate NaOH·H
2O cystallizes from water solutions between 12.3 and 61.8 °C. The commercially available "sodium hydroxide" is often this monohydrate, and published data may refer to it instead of the anhydrouscompound.
Sodium hydroxide is used in many industries in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner.
- Pay Mode Terms: T/T (Bank Transfer)
Sebacic Acid
| Usage/Application | Industrial |
| Form | Powder |
| Usage | Commercial, Industrial |
| Physical State | Powder |
| Grade Standard | Technical Grade |
| Formula | C10H18O4 |
Sebacic acid is a naturally occurring dicarboxylic acid with the structure (HOOC)(CH2)8(COOH).
In its pure state it is a white flake or powdered crystal. The product is described as non-hazardous, though in its powdered form it can be prone to flash ignition (a typical risk in handling fine organic powders).Sebacic acid is produced from castor oil by using sodium hydroxide, sulfuric acid with catalysts including zinc oxide and phenol.[citation needed] Byproducts include glycerol, octanol and polymer residue.
- Pay Mode Terms: T/T (Bank Transfer)
Acetonitrile
| Usage/Application | Industrial |
| Physical State | Liquid |
| Allyl alcohol ppm | 30 max. |
| Formula | C2H3N |
| Molar mass | 41.05 g/mol |
| Density | 786 kg/m3 |
- 160 Kgsx80 Drumsx1 Fcl
Specifications:
| Test items | Specifications | Results |
| Appearance | Colorless, Limpid liquid. | Colorless, Limpid liquid. |
| Specific gravity, 20/20°c | 0.782~0.785 | 0.783 |
| Distillation range, °c | 80.0~82.0 | 80.9~82.0 |
| Acetonitrile, %wt | 99.9 min. | 99.74 |
| Water. %wt | 0.05 max. | 0.0180 |
| Copper, ppm | 0.3 max. | < 0.1 |
| Iron, ppm | 0.3 max. | < 0.1 |
| Color. Apha/pt-co | 10 max. | 5 |
| Acidity(as ch3cooh), %wt | 0.005 max. | 0.0009 |
| Propion1trile, ppm | 500 max. | 331 |
| Acrylonitrile, ppm | 5 max. | N.d. |
| Acetone, ppm | 5 max. | N.d. |
| Hcn. ppm | 10 max. | 1.0 |
| Free ammonia, ppm | 6 max. | 2. |
| Allyl alcohol, ppm | 30 max. | N.d. |
"This particular price varies on daily basis.please call and check for the latest price."
*Your information is safe with us.
Propionaldehyde
| CAS Number | 123-38-6 |
| Chemical Formula | C3H6O |
| Packaging Details | 500 lit Jar |
| Synonyms | Propanal, Propaldehyde |
| Grade Standard | Reagent Grade, Bio-Tech Grade, Technical Grade |
| Physical State | Liquid |
It is principally used as a precursor to trimethylolethane (CH3C(CH2OH)3) through a condensation reaction with formaldehyde; this triol is an important intermediate in the production of alkyd resins. Other applications include reduction to propanol and oxidation to propionic acid.[1]
Condensation of propionaldehyde with tert-butylamine gives CH3CH2CH=N-t-Bu, a three-carbon building block used in organic synthesis. Deprotonation of this imine withLDA produces CH3CHLiCH=N-t-Bu, which in turn condenses with aldehydes."This particular price varies on daily basis. Please call and check for the latest price"
Explore more products
Resorcinol
Get Best QuoteLiquid Toluene
Get Best QuotePhosphorous Acid
Get Best QuoteOxalic Acid
Get Best QuoteMethylene Dichloride MDC
Get Best QuoteVersatic Acid 10
Get Best Quote